|
Works on induction-suction principle of
blasting. The most important point in wet
blasting is its ability to use very fine
abrasive-as fine as 5 micron. Fine abrasive
particles are suspended in liquid, usually water
and then pumped to a nozzle as a slurry. At
nozzle, the slurry is introduced into air -
stream and propelled against job. The glandless
slurry pump is used to feed the slurry at
positive pressure into blast gun. The wetted
parts of pump are of thermoset plastic material
for corrosion resistance. WB machine is useful
in tool room to remove feather burrs from multi
tooth cutting tools such as milling cutters,
broaches and taps eliminating hours of hand
honing time. It deburrs intersecting holes in
precision parts which are inaccessible by any
other method. The finest machined surface can be
super finished without damage to sharp edges and
exact tolerances.
Available in three standard models :
l
WB-9182
l
WB-12090
Options available on request :
l High capacity slurry pump for high
output.
l Higher output Blast Gun in place of
standard.
l Foot operated treadle switch for
blasting ON / OFF.
l Fitted with optional accessories. |
