|
It is a small handy blasting tool for light
work, touch-up cleaning and maintenance job. It
does blasting in dust free conditions.
Unit weight : 3.5 Kg.
Abrasive charge : 1.8 Kg.
Total weight : 5.3 Kg.
No special skill required to operate.
Small enough to be fitted through tank manhole,
or into hard to get at areas. Ideal for
locations where abrasive must be fully contained
i.e. machinery area, electronic equipment etc.
Swivel head allows blasting at any
position-overhead, side-ways, down hand etc.
Most common re-useable abrasive may be used,
such as shot and grit, aluminium oxide etc
One-man operation equals three man cleaning by
wire brushing, disc sanding or other hand
cleaning methods.
Always ready to use. Attach to 19 mm air line
and start blasting.
No electrical connections. Requires 33 to 60 cfm
at 90 to 100 psi pressure. Best pattern approx.
31.8 mm wide.
A while metal surface is obtained suitable for
any recoating. |
